European Oak Type AT10 Cladding (Per Metre)

European Oak cladding is available in a wide range of sizes which gives European Oak an almost unparalleled versatility, allowing Architects and Designers to design innovative and very attractive cladding solutions in the knowledge that they are using a durable, hard wearing, sustainable and environmentally friendly material.

European Oak is a yellow to golden brown coloured hardwood, which will weather to a natural silver colour if left unprotected.

Our unprocessed oak arrives in finger jointed lengths usually between 2.4m – 5.4m, if you have specific length requirements then you may make a request above, however, we must emphasize the fact that we cannot guarantee specific lengths.

Face Cover:
18 x 94mm is 75mm
18 x 119mm is 100mm
18 x 144mm is 125mm

All of our Cladding is supplied with a smooth machined finish ready to apply the finishing product of your choice.

Please note that the machining process will reduce the overall size of your selected cladding by roughly 5mm off of both the width and thickness of the cladding.

Since timber is a natural product, each section may contain a different grain pattern, colour, natural figuring, and some small pin knots.
Additionally, it's important to consider the potential for imperfections such as split or splintered ends. To accommodate these imperfections and ensure you have the necessary length for your project, we advise that you allow for approximately 300mm of extra length beyond the actual usable length. This extra length provides a buffer to trim off any ends that may not meet your quality standards, ensuring that you can work with the highest quality sections of timber for your specific needs.
By accounting for this additional length, you can better manage the inherent variability in timber and achieve a more precise and aesthetically pleasing result in your woodworking projects.