Need free advice & help?

Request a callback:

If your requirement is a litte more complicated to work out, our experienced staff are here to help. We can give technical advice and tips for your project:

Or contact us by:

Phone on 02476 304848

From £15.45 (excl VAT)

Solid PSE American White Ash

Solid PSE American White Ash

Product Information:

This product is machined in-house out of American White Ash.

Our unprocessed ash usually arrives in lengths between 2.4m - 3.9m, if you have specific length requirements then you may make a request in writing (via an email), however we must emphasize the fact that we cannot guarantee specific lengths. (The minimum length we sell is 2.4m)

Please note that the machining process will reduce the overall size of your selected ash timber by roughly 5mm off of both the width and thickness of the timber and for any width selected over 270mm wide your timber will be machined in sections and joined together, this enables us to achieve wider sections of timber and at the same time provides overall structural strength.

All of our solid square edge timber is supplied with a smooth machined finish ready to apply the finishing product of your choice.

Since Timber is a natural product each section may contain a different grain pattern, natural figuring and some small pin knots.

Delivery Information:

The delivery cost is automatically calculated when you proceed to checkout.

Most of the products sold through this website are made to order and will require a minimum of 10 working days lead time, this is why you cannot select a date earlier than this lead time on the checkout page.

However, if your order only consists of white primed MDF products, such as Skirtings/Architraves/Linings/Windowboards (excluding Stair Parts), or of the OSMO range of finishing products, then we will deliver your order before the selected date, as soon as possible. If you are or have requested a quote, then you will be informed regarding the lead times within our reply.